TE Connectivity 202K1, 222K1 Series Adhesive Kit,1 piece

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Chemical and Heat-Resistant Adhesive Kits

From TE Connectivity, the S1125 high performance two-part epoxy adhesive kits offering excellent chemical and heat resistance properties. Developed for use with the system 25, 100 and 200 cable harnessing ranges. The S1125 adhesive kits are ideal for use with heat shrink tubing, moulded parts adapters and fittings. Perfect for service and repair of equipment and new installations.

Features and Benefits

• Excellent chemical and heat resistance
• Easy to use, requires no mixing
• 1 to 2-hour pot life at room temperature
• Superior surface adhesion
• Cures at room temperature in 24 hours and in 1 hour at 85˚C
• Wide operating temperature range -55˚C to + 150˚C
• Produces minimal amount of waste

Applications

S1125 flexible two-part epoxy can be used in a wide range of industrial and high specification applications. They are particularly useful in areas where tubing and moulded parts need to have high-temperature fluid resistance and long-term heat resistance. Ideal for harsh environments where a waterproof seal is required. Some of the most common are

• Automotive wiring harnesses
• Military ground vehicles
• Marine and offshore installations

What’s included in the kits?

S1125-KIT -8 contains the following components;
1 x 50 ml dual syringe & 3 mixing nozzles
5 x mixing sticks
5 x mixing cups
5 x abrasive patch
1 x instruction leaflet

S1125-KIT-1 contains the following components
5 x 10g sachets
5 x mixing sticks
5 x mixing cups
5 x abrasive patch
1 x instruction leaflet

FAQ

Q: Are there any recommended products?
A: Yes, RS Components offer an extensive range of heat shrink tubing and moulded parts that are compatible with the S1125 high-performance epoxy adhesive kits.

System 25 = DR25 Heat Shrink Tube in various lengths and diameters (mm) and -25 moulded parts in various shapes and sizes
System 100 = ZHTM Heat Shrink Tube in various lengths and diameters (mm) and -100 moulded parts in various shapes and sizes
System 200 = RW-200 Heat Shrink Tube n various lengths and diameters (mm) and -12 moulded parts in various shapes and sizes

Specifications
Attribute Value
Kit Type Adhesive Kit
Number of Pieces 1
Series S1125
Temporarily out of stock - back order for despatch when stock is available
Price Each
HK$ 738.91
(exc. GST)
units
Per unit
1 - 14
HK$738.91
15 - 49
HK$658.30
50 - 99
HK$611.29
100 - 249
HK$577.71
250 +
HK$537.40
Related Products
C27 is a polypropylene metallized film, with a ...
Description:
C27 is a polypropylene metallized film, with a cylindrical plastic can-type construction filled with resin. It uses faston and plastic deck or cable terminals. Applications: Typical applications include motor start S0 safety class. Self-healingRated frequency of 50 Hz and 60 ...
Kemet C878 Series are polypropylene capacitors metallised film ...
Description:
Kemet C878 Series are polypropylene capacitors metallised film with cylindrical aluminium can type filled with liquid resin, plastic deck and overpressure safety device. Self-healing Rated frequency of 50 Hz and 60 Hz High capacitance density Safety device protection.
This capacitor series is designed specifically for motor ...
Description:
This capacitor series is designed specifically for motor run applications where the capacitors are used with permanent split capacitor type motors. To be used on either 50 Hz or 60 Hz systems. Not to be used at higher frequencies or ...
Gem III General Purpose capacitors are used for ...
Description:
Gem III General Purpose capacitors are used for filtering on various light industrial equipment. The capacitors offer lasting reliability and safe operation. Metallised film capacitorsPressure Sensitive Interrupter (psi)Long-term reliability and safe operationCost effectiveSuperior qualityGeneral PurposeQuick ...