TLV3202AIDGK Texas Instruments, Comparator, Push-Pull O/P, 2.9ns 2.7 → 5.5 V 8-Pin MSOP

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TLV series Low Voltage Comparators

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Specifications
Attribute Value
Comparator Type Low Power
Mounting Type Surface Mount
Package Type MSOP
Power Supply Type Single
Output Type Push-Pull
Number of Channels per Chip 1
Typical Response Time 2.9ns
Pin Count 8
Typical Single Supply Voltage 2.7 → 5.5 V
Dimensions 3.1 x 3.1 x 0.95mm
Length 3.1mm
Width 3.1mm
Height 0.95mm
Typical CMRR 70dB
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Typical PSRR 85dB
Price Each (In a Pack of 10)
HK$ 11.491
(exc. GST)
units
Per unit
Per Pack*
10 - 10
HK$11.491
HK$114.91
20 - 40
HK$11.259
HK$112.59
50 - 90
HK$10.471
HK$104.71
100 - 490
HK$9.571
HK$95.71
500 +
HK$8.445
HK$84.45
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Packaging Options:
Related Products
RS Pro flexible alarm cable comprised of multi ...
Description:
RS Pro flexible alarm cable comprised of multi conductor cables. Applications include connecting alarm centres to motion detectors or digicodes. Rigid bare copper conductorPVC InsulationFlame retardant outer sheathRip cord.
A shielded security and alarm cable for commercial ...
Description:
A shielded security and alarm cable for commercial applications. Features and Benefits· Bare copper stranded conductor· PVC or LSNH jackets with rip cord· Beldfoil shield tape with drain wire· Grey flame retardant non-corrosive jacket.
Suitable for intercom/P.A. and general sound/audio systems. Features ...
Description:
Suitable for intercom/P.A. and general sound/audio systems. Features and Benefits·Bare copper stranded conductor·Voltage Rating: 300V.
The RS range of intruder alarm signal cable ...
Description:
The RS range of intruder alarm signal cable is made of the highest quality raw materials. 7 strandsGrade 1 tinned annealed copper conductorsPVC insulatedLead and tin freeWhite PVC sheathEasy to stripFlexible100 and 500m lengths.