LM361M/NOPB Texas Instruments, Dual Comparator, TTL O/P, 0.02μs 14-Pin SOIC

Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Differential Input/Output Comparators

A range of voltage comparators from Texas Instruments having both differential inputs and differential outputs.

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Specifications
Attribute Value
Comparator Type High Speed
Mounting Type Surface Mount
Package Type SOIC
Power Supply Type Dual
Output Type TTL
Number of Channels per Chip 2
Typical Response Time 0.02µs
Pin Count 14
Dimensions 8.738 x 3.988 x 1.499mm
Length 8.74mm
Width 3.99mm
Height 1.5mm
Typical Voltage Gain 3 V/mV
Minimum Operating Temperature 0 °C
Typical Dual Supply Voltage ±15V
Maximum Operating Temperature +70 °C
110 In stock for delivery within 3 working days
Price Each (In a Tube of 55)
HK$ 16.703
(exc. GST)
units
Per unit
Per Tube*
55 +
HK$16.703
HK$918.665
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...