FTDI Chip USB to Serial/Parallel Breakout Module, FT232H - UM232H-B

  • RS Stock No. 888-8794
  • Mfr. Part No. UM232H-B
  • Manufacturer FTDI Chip
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

UM232H USB to Serial UART Development Module, FTDI Chip

The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6in wide 28-pin DIP socket. The USB connection to a host system is via a mini-B USB connector.

USB 2.0 Hi-Speed (480Mbits/s) and Full Speed (12Mbits/s) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Small USB Type B connector common on many commercial devices
USB bus or self-powered options
Asynchronous UART transfer data rate up to 12Mbaud
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Fully assisted hardware or X-On / X-Off software handshaking
Auto-transmit buffer control for RS-485 applications
Supports a half duplex FT1248 interface with a bi-directional data bus (1, 2, 4 or 8 bits wide)
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
Support for USB suspend and resume
UHCI / OHCI / EHCI host controller compatible
FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
+2.97 to +5.25V single-supply operation

Specifications
Attribute Value
Kit Classification Breakout Module
Featured Device FT232H
Discontinued product
Related Products
Professional adjustable grip wrench with 3 point contact ...
Description:
Professional adjustable grip wrench with 3 point contact jaw for a firm grip on the workpiece. Ideal for gripping, clamping and holding applications. Nickel Plated Vanadium Steel construction for strength and corrosion resistanceAdjustment screw and quick release lever with spring ...
EGA Master Stillson Pipe Wrenches are manufactured with ...
Description:
EGA Master Stillson Pipe Wrenches are manufactured with forged special steel handles. They are specially designed for the toughest uses in industries such as mining or oil & gas. Forged special steel handles improve safety, presenting plastic deformation before fracture, ...
The Ega-Master pipe wrench has a jaw capacity ...
Description:
The Ega-Master pipe wrench has a jaw capacity of 50.8mm and overall length of 304.8mm. • Convenient hanging hole for easy storage• Ductile casting APC I-Beam handle with maximum strength and minimum weight • Enlarged handle end helps to prevent ...
Quick adjusting jaw can be operated fast and ...
Description:
Quick adjusting jaw can be operated fast and conveniently with one handRatches quickly to work surfaceSmooth release on completion of jobForged hook 58mm capacity jaw equivalent to a 14 in. pipe wrenchBroached teeth ideal for most surfaces including PVC and ...