ITT Cannon Male Solder Circular Connector Contact, Wire Size 16 AWG
- RS Stock No.:
- 190-3432
- Mfr. Part No.:
- T3P16MS1LY / 192900-0633
- Manufacturer:
- ITT Cannon
The image is for reference only, please refer to product details and specifications
700 In stock for delivery within 3 working days
Added
Price Each (In a Pack of 100)
HK$15.036
| Units | Per unit | Per Pack* |
| 100 - 100 | HK$15.036 | HK$1,503.60 |
| 200 - 300 | HK$14.66 | HK$1,466.00 |
| 400 + | HK$14.435 | HK$1,443.50 |
| *price indicative | ||
- RS Stock No.:
- 190-3432
- Mfr. Part No.:
- T3P16MS1LY / 192900-0633
- Manufacturer:
- ITT Cannon
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Solder Cup Contact
Suitable for 500 mating cycles
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Specifications
Attribute | Value |
|---|---|
| Gender | Male |
| Wire Size | 16 AWG |
| Termination Method | Solder |
| Series | T3P |
| Current Rating | 13A |
| Contact Type | Signal |
| Length | 26.19mm |
| Contact Plating | Gold |
| Contact Material | Brass |
| Maximum Contact Resistance | 5mΩ |
| Minimum Operating Temperature | -55°C |
| Maximum Operating Temperature | +125°C |
| Mounting Type | Cable Mount |