Toshiba 74VHCT126AFT, Quad Bus Buffer, 9.5 ns @ 50 pF 8mA, 14-Pin TSSOP

  • RS Stock No. 171-3359
  • Mfr. Part No. 74VHCT126AFT
  • Manufacturer Toshiba
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The 74VHCT125AFT and 74VHCT126AFT are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHCT125AFT requires the 3-state control input G to be set high to place the output into the high impedance state, whereas the 74VHCT126AFT requires the control input G to be set low to place the output into high impedance. The input voltage are compatible with TTL output voltage. This device may be used as a level converter for interfacing 3.3 V to 5 V system. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. There structure prevents device destruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc.

Wide operating temperature range: Topr = -40 to 125 
High speed: Propagation delay time = 3.8 ns (typ.) at VCC = 5.0 V
Quiescent supply current: ICC = 4.0 μA (max) at Ta = 25 
Compatible with TTL input: VIL = 0.8 V(max)
VIH = 2.0 V(min)
Power down protection is provided on all inputs and outputs.
Balanced propagation delays: tPLH ≈ tPHL
Low noise: VOLP = 0.8 V (max)
Pin and function compatible with the 74 series

Specifications
Attribute Value
Logic Family 74VHCT
Number of Element Inputs 1
Number of Elements per Chip 4
Maximum Propagation Delay Time @ Maximum CL 9.5 ns @ 50 pF
Maximum High Level Output Current -8mA
Maximum Low Level Output Current 8mA
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 14
Dimensions 5 x 4.4 x 1mm
Height 1mm
Length 5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Propagation Delay Test Condition 50pF
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Width 4.4mm
On back order for despatch 30/11/2020, delivery within 3 working days
Price Each (On a Reel of 2500)
HK$ 0.767
(exc. GST)
units
Per unit
Per Reel*
2500 - 2500
HK$0.767
HK$1,917.50
5000 +
HK$0.708
HK$1,770.00
*price indicative
Related Products
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Glenair full nelson heatshrink boots (LSZH), series 77 ...
Description:
Glenair full nelson heatshrink boots (LSZH), series 77 type 2 for regulated environmental safety applications meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These LSZH semi rigid polyolefin heat shrink boots fit most standard heatshrink boot ...
Glenair full nelson lipless heatshrink boots, zero halogen, ...
Description:
Glenair full nelson lipless heatshrink boots, zero halogen, series 77 type 2 meet low smoke and toxicity requirements for transit, aircraft systems and shipboard. These halogen free polyolefin heat shrink boots have good resistance to oils, fuels and solvents and ...