Toshiba 74LCX541FT, Octal Non-Inverting Schmitt Buffer, 20-Pin TSSOP

  • RS Stock No. 171-3304
  • Mfr. Part No. 74LCX541FT
  • Manufacturer Toshiba
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The 74LCX541FT is a high-performance CMOS octal bus buffer. Designed for use in 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. The device is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5 V supply environment for both inputs and outputs. The 74LCX540FT is an inverting 3-state buffer having two active-low output enables. When either OE1 or OE2 are high, the terminal outputs are in the high-impedance state. This device is designed to be used with 3-state memory address drivers, etc. All inputs are equipped with protection circuits against static discharge.

Low-voltage operation: VCC = 1.65 to 3.6 V
High-speed operation: tpd = 8.5 ns (max) (VCC = 3.0 to 3.6 V)
Output current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V)
Power-down protection provided on all inputs and outputs
Pin and function compatible with the 74 series
(74LVC/ALVC/ etc.) 541 type

Specifications
Attribute Value
Logic Family 74LCX
Number of Channels 8
Input Type CMOS
Polarity Non-Inverting
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 20
Maximum High Level Output Current -8mA
Maximum Low Level Output Current 24mA
Maximum Propagation Delay Time @ Maximum CL 25 ns @ 50 pF
Dimensions 6.5 x 4.4 x 1mm
Height 1mm
Maximum Operating Temperature +85 °C
Propagation Delay Test Condition 50pF
Length 6.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Supply Voltage 1.5 V
Width 4.4mm
On back order for despatch 02/07/2020, delivery within 3 working days
Price Each (On a Reel of 2500)
HK$ 2.439
(exc. GST)
units
Per unit
Per Reel*
2500 +
HK$2.439
HK$6,097.50
*price indicative
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
A variable speed regulator unit is for use ...
Description:
A variable speed regulator unit is for use with electric motors, miniature drill equipment etc. Its very small size which allows it to be easily installed, especially where space limitation is an important factor. Adjustment is by a miniature slotted ...
Cost-effective dc motor speed controllers suitable for use ...
Description:
Cost-effective dc motor speed controllers suitable for use with shunt and permanent dc motors, such as the Parvalux range. The built-in EMC and Harmonic Filters can enable a complete drive to conform with the statutory EMC and Harmonics directives. High ...
Microprocessor powered controller for permanent magnet, shunt wound, ...
Description:
Microprocessor powered controller for permanent magnet, shunt wound, flat style and general purpose dc. motors. Operates from a battery or rectified smooth dc. supply12 or 24V dc. supply voltage15 or 30A current rated versionForward and reverse direction controlProtected against short ...