Schneider Electric AZ5CE Series Insulated Crimp Bootlace Ferrule, 8.2mm Pin Length, 1.6mm Pin Diameter, 0.75mm² Wire

Product overview and Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): FR
Product Details

Moulded Cable Ends

Cable ends comprising a tinned copper tube with a moulded isolating collar at the end.
The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.
These ends are available for conductors with cross-sections from 0.5 → 2.5 mm2, in different colours.
These ends are packaged in small boxes of 100 pieces for the single version or 200 pieces for the double, for ease of use. This packaging ensures good gripping of the ends in thedish-shaped receptacle. Simple pressure on the sides enables the amount of ends required to be extracted.

//media.rs-online.com/t_line/L2546485-10.jpg
Specifications
Attribute Value
Maximum Wire Size mm² 0.75mm²
Pin Diameter 1.6mm
Insulation Material Plastic
Number of Entries 1
Colour Blue
Pin Length 8.2mm
Insulation Insulated
Maximum Wire Size AWG 20AWG
Overall Length 13mm
Series AZ5CE
Stock check temporarily unavailable - call for stock availability
Price Each (In a Box of 200)
HK$ 0.691
(exc. GST)
units
Per unit
Per Box*
200 - 800
HK$0.691
HK$138.20
1000 - 4800
HK$0.673
HK$134.60
5000 - 9800
HK$0.601
HK$120.20
10000 - 19800
HK$0.546
HK$109.20
20000 +
HK$0.489
HK$97.80
*price indicative
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...