- RS Stock No.:
- 413-377
- Mfr. Part No.:
- AAO32
- Manufacturer:
- Eaton
110 In stock for delivery within 3 working days
Added
Price Each (In a Pack of 5)
HK$79.59
Units | Per unit | Per Pack* |
5 + | HK$79.59 | HK$397.95 |
*price indicative |
- RS Stock No.:
- 413-377
- Mfr. Part No.:
- AAO32
- Manufacturer:
- Eaton
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details
Cooper Bussman Bolted Tag Fuse - British Standard
Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.
Features & Benefits
The low-temperature rise enables the fuse to be suitable for high-density mounting applications
Fuse links, specifically designed for the protection of applications
Conforms to industry standards
Low voltage fuse
Suitable for three-phase applications
Suitable for type 2 co-ordinated applications as defined in IEC 947-4
Low power loss, typically 20% lower than the requirements of BS88
Fuse links, specifically designed for the protection of applications
Conforms to industry standards
Low voltage fuse
Suitable for three-phase applications
Suitable for type 2 co-ordinated applications as defined in IEC 947-4
Low power loss, typically 20% lower than the requirements of BS88
Why use a slotted tag fuse?
A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.
AAO32 Bolted Tag Fuse
Features a 32 A current rating
Holds a 550 V ac voltage rating
Sits within the GG application category
Dimensions are: L85mm x D13.7 mm x H35.5mm
A2 fuse size
Holds a 550 V ac voltage rating
Sits within the GG application category
Dimensions are: L85mm x D13.7 mm x H35.5mm
A2 fuse size
Features & Benefits
Overall length of 85mm to fit into compact circuit designs
Bolted offset tags for easy attachment to fuse holders
Designed for type-2 coordinated applications to save downtime and improve safety
Low resistance for higher sensitivity to current and voltage changes
Bolted offset tags for easy attachment to fuse holders
Designed for type-2 coordinated applications to save downtime and improve safety
Low resistance for higher sensitivity to current and voltage changes
Is it possible to reuse this fuse after it breaks?
No, once an irregularity in voltage or current flow causes a fuse element to break, the whole fuse needs to be replaced immediately to keep your equipment safe to use and protected from damage.
Note
Eaton formerly known as Bussmann
Specifications
Attribute | Value |
---|---|
Current Rating | 32A |
Fuse Size | A2 |
Voltage Rating | 550V ac |
Fuse Standard | BS 88, IEC 269 |
Fixing Centres | 73mm |
Application Category | gG |
Tag Width | 8.7mm |
High Rupture Capacity | Yes |
Overall Length | 85mm |
Body Diameter | 13.7mm |
Tag Type | Bolted |
Body Length | 35.5mm |
Tag Orientation | Offset |
Body Height | 35.5mm |
Fuse Dimensions | 13.7 x 35.5mm |
Series | Bussmann |