Cooper Bussmann, 32A, A1, British Standard Fuse, gG - gM, 415V ac

Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IN
Product Details

Cooper Bussman Bolted Tag Fuse - British Standard

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

Features & Benefits

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

//media.rs-online.com/t_line/L413793-01.gif
Specifications
Attribute Value
Current Rating 32 A
Fuse Size A1
Voltage Rating 415 V ac
Fuse Standard BS 88, IEC 269
Fixing Centres 44.5mm
Application Category GG - gM
Tag Width 11.1mm
High Rupture Capacity Yes
Overall Length 55mm
Body Diameter 17.5mm
Body Height 35.6mm
235 In stock for delivery within 3 working days
Price Each (In a Pack of 5)
HK$ 86.12
(exc. GST)
units
Per unit
Per Pack*
5 - 55
HK$86.12
HK$430.60
60 - 120
HK$85.35
HK$426.75
125 - 245
HK$84.564
HK$422.82
250 - 495
HK$83.778
HK$418.89
500 +
HK$82.974
HK$414.87
*price indicative
Related Products
Range of modular frame switches with miniature buttons, ...
Description:
Range of modular frame switches with miniature buttons, allowing many combinations and applications.Switch or pushbutton function in the same body (by removing the jumper).Outputs: one side for fitting to the PCB, the other to the wire.
Switches with body and switch mechanism identical to ...
Description:
Switches with body and switch mechanism identical to the miniature toggle switches with silver contacts, but fitted with alternative style of actuators in a choice of coloursEach switch is supplied with an optional black bezel that may be fitted by ...
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
IP68 rating if used without panel assembly systemThese ...
Description:
IP68 rating if used without panel assembly systemThese switches are terminated with 6.35mm fast-on terminals and are supplied with a panel-sealing gasket Illuminated versions are available with a choice of 250V neon or red or green LEDs with integral resistors ...