ON Semiconductor LC709203FQH-01TWG Lithium-Ion, Battery Fuel Gauge IC, 2.5 → 4.5 V 8-Pin, WDFN

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LC709203F is a Fuel Gauge for a single lithium ion battery. It is part of our "Smart LiB Gauge" family of Fuel Gauges which measure the battery RSOC (Relative State Of Charge) using its unique algorithm called "HG-CVR". The "HG-CVR" algorithm eliminates the use of a sense resistor and provides accurate RSOC information even under unstable conditions (e.g. changes of battery: temperature, loading, aging and self discharge). An accurate RSOC contributes to the operating time of portable devices.

Alerts for Low RSOC and / or Low Voltage
Temperature compensation :Sense Thermistor inputVia I2C
Detect Battery insertion
I2C Interface (up to 400 kHz supported)

Specifications
Attribute Value
Battery Type Lithium-Ion
Mounting Type Surface Mount
Package Type WDFN
Pin Count 8
Length 4mm
Typical Operating Supply Voltage 2.5 → 4.5 V
Dimensions 4 x 3 x 0.75mm
Width 3mm
Height 0.75mm
Maximum Operating Temperature 85 °C
Maximum Output Current 3mA
Maximum Output Voltage 5.5 V
Minimum Operating Temperature -40 °C
Minimum Output Current -200µA
Minimum Output Voltage -0.3 V
On back order for despatch 02/03/2020, delivery within 3 working days
Price Each (On a Reel of 2000)
HK$ 5.975
(exc. GST)
units
Per unit
Per Reel*
2000 +
HK$5.975
HK$11,950.00
*price indicative
Related Products
Contact Form A - Normally open24Vac and 70Vac ...
Description:
Contact Form A - Normally open24Vac and 70Vac version availableOperating temperature range: -20 to +70°C (24V); -25 to +70°C (70V)Pin pitch 12mmContact resistance 200mΩ (24V); 150mΩ (70V).
Combined opening sensor (reed contact) for flush/surface mounting ...
Description:
Combined opening sensor (reed contact) for flush/surface mounting with NC or NO contactSuitable for private and commercial buildings with large switching distancesSuitable for all applications The contacts are suitable for both parallel and overhead mounting (magnet/contact).
Magnetic field sensors from Balluff. BMF 21 Series ...
Description:
Magnetic field sensors from Balluff. BMF 21 Series is designed with an integral swinging bracket arm that allows it to self-adjust across a wide range of cylinder diameters. BMF 21 is ideal for the tie-rod and external rail profile cylinders. ...
Gas filled, hermetically sealed in miniature metal housings ...
Description:
Gas filled, hermetically sealed in miniature metal housings for use in ON/OFF control applications±7.5° from the horizontal angleThe switch movement required to cause contact change (E.g. on/off) is called the differential angle.