Aim-TTi TGR6000 Waveform Generator 6GHz

  • RS Stock No. 737-7183
  • Mfr. Part No. TGR6000
  • Manufacturer Aim-TTi
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Aim-TTi TGR6000 6GHz RF Signal Generator

The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.

0MHz to 6000MHz frequency range
10Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-110dBm to +7dBm amplitude, 0.1dB steps
Fast stepping sweep with dwell times down to 10ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote control through RS232, USB, LAN and GPIB
Significantly lower cost than other 6GHz generators

Supplied with

Operating manual, driver software, power lead

Attribute Value
Maximum Frequency 6GHz
Minimum Frequency 10 MHz
Resolution 0.1 dB
Weight 3.7kg
Plug Type Type C - European Plug, Type G - British 3-pin
Height 86.5mm
Model Number p TGR 6000
Maximum Operating Temperature +40°C
Dimensions 350 x 213.5 x 86.5mm
Interface Type GPIB, LAN, RS232, USB
Minimum Operating Temperature +5°C
Data Entry Keyboard
Inputs AC In, Reference In, Trig In
Width 213.5mm
Display Type 20 Char x 4 Rows
Length 350mm
Sweep Linear, Logarithmic
3 In stock for delivery within 3 working days
Price Each
HK$ 37,908.00
(exc. GST)
Per unit
1 +
Related Products
The SCS ESD grounding cord is a 15ft ...
The SCS ESD grounding cord is a 15ft 20AWG PVC wire. It has moulded-in male snap fastener with integral 1Mohm resistor on one end and solderless terminal on other. It comes in black nylon cover with black polyester insert and ...
Our own brand of RS Pro ESD wrist-straps ...
Our own brand of RS Pro ESD wrist-straps feature premium grade fabric band with an elastic ratio of 1:2.5” to 1:3. The outer surface of the wristband is non-conductive and the inside surface of the strap is conductive lined with ...
Our RS Pro range of hard-wearing ESD grounding ...
Our RS Pro range of hard-wearing ESD grounding straps have been designed to ensure efficient static bleeding, to ensure a reliable method of static dissipation. Predominantly used within the electronics industry, but still suited to enthusiasts working at a bench. ...
The RS Pro anti-static wrist strap is a ...
The RS Pro anti-static wrist strap is a premium metal wrist band (stainless steel) that is adjustable and features a coiled cord. Its metal interior is great for grounding. This wrist strap will fit all wrists as its circumference adjusts ...