Analog Devices EVAL-FW-LPMFB2, Active Filter Daughter Board for EVAL-FW-MOTHER

  • RS Stock No. 833-5105
  • Mfr. Part No. EVAL-FW-LPMFB2
  • Manufacturer Analog Devices
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Analog Devices Filter Wizard Evaluation System

The Analog Devices Filter Wizard evaluation board system consists of a motherboard and several snap-apart format daughter boards which allow designers to assemble and evaluate various active filter designs. Each mother-board has slots for four daughter boards, each corresponding to a stage in the filter design being evaluated. If the design requires more than four stages, multiple motherboards can be connected together. The system facilitates change of stage sequence in a filter design and complete flexibility in the choice of stage types utilised. Note that both the mother-board and daughter boards are supplied unpopulated; users can use the BOM and assembly information generated in Analog Filter Wizard to order components and assemble the complete filter design to be evaluated.

The following daughter boards are available:

833-5102 · EVAL-FW-LPMFB1 · Multiple Feedback Low-pass for single op-amps
881-3144 · EVAL-FW-LPSK2 · Sallen-Key Low-pass for dual op-amps
881-3148 · EVAL-FW-HPSK2 · Sallen-Key High-pass for dual op-amps
833-5105 · EVAL-FW-LPMFB2 · Multiple Feedback Low-pass for dual op-amps
881-3157 · EVAL-FW-BPDF2 · Multiple Feedback Band-pass for dual op-amps

Note

The single op-amp board accepts either SOIC and SOT-23 packages, the dual op-amp boards accept either SOIC or MSOP packages.

Active Filters

Specifications
Attribute Value
Analogue Function Active Filter
Kit Classification Daughter Board
Featured Device EVAL-FW-MOTHER
2 In stock for delivery within 3 working days
Price Each
HK$ 81.52
(exc. GST)
units
Per unit
1 +
HK$81.52
Related Products
A range of standard feed through DIN Rail ...
Description:
A range of standard feed through DIN Rail terminals with an easy to operate screw connection mechanism that can connect solid and flexible wires, with or without wire-end ferrules. The pluggable insulated cross connection system allows for time saving and ...
WWK 2,5-3 D/U /V0 Initiator terminal block with ...
Description:
WWK 2,5-3 D/U /V0 Initiator terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 2.5 sq.mm, width 6 mm, colour gray. (See RS Stock No. 865-1340)WK 2,5-3 D SL /V0 Initiator terminal block ...
Screw connection DIN rail mounted earth terminal blocksVery ...
Description:
Screw connection DIN rail mounted earth terminal blocksVery low contact resistanceGreen/yellow earth colour codingSuitable for a wide range of cross-section and wire typesWires can be connected without any special preparationVibration proof connectionHigh reliability and maintenance freeEasy mounting and ...
Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses Conforms to IEC257 ...
Description:
Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses Conforms to IEC257 Anti rotation spigot IP20 finger protection Cable entry 10mm sq (3x1.5mm sq or 2x2.5mm sq)Supplied complete with earth screw and washer.