Analog Devices EVAL-CN0218-SDPZ, CN0218 Current Monitor Evaluation Board

  • RS Stock No. 803-1649
  • Mfr. Part No. EVAL-CN0218-SDPZ
  • Manufacturer Analog Devices
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Evaluation Board for HV Current Shunt Monitor AD8212

An evaluation board for Current Monitoring with only 0.2% error in the presence of a 500V Common-Mode-Voltage, utilising the Analog Devices AD8212 Current Shunt Monitor IC. This circuit is one of the Analog Devices Circuits from the Lab™ series of reference circuits.

The Evaluation Board contains the following ICs:

AD8212 High Common-mode-voltage Current Shunt Monitor IC
ADuM5402 Quad-Channel Isolator with Integrated DC-to-DC Converter
AD7171 16-Bit Low Power Sigma-Delta ADC
AD8605 Precision CMOS Rail-to-Rail Input/Output Op-Amp
ADR381 2.5V High Accuracy Band Gap Voltage Reference

Note

An external shunt resistor with maximum voltage drop of 500 mV at maximum load current is required.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specifications
Attribute Value
Analogue Function Current Monitor
Kit Classification Evaluation Board
Kit Name CN0218
1 In stock for delivery within 3 working days
Price Each
HK$ 566.71
(exc. GST)
units
Per unit
1 +
HK$566.71
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
The Digilent breadboard kit is a solderless kit ...
Description:
The Digilent breadboard kit is a solderless kit that accepts 20 to 29 AWG wires and comes with some jumper wires. It is back with rugged steel and includes 4 adhesive rubber feet. • 3x630 tie point terminal strips included• ...
The PIDG Crimp Terminal and Splice Introduction Service ...
Description:
The PIDG Crimp Terminal and Splice Introduction Service Kit from TE Connectivity contains 295 of the most popular terminals and splices from the PIDG and Plast-Grip ranges. The kit comes in a rugged plastic case which stores multiple different types ...
The kit contains a range of butt splices, ...
Description:
The kit contains a range of butt splices, receptacles, ring terminals and spade terminals. Information on the pieces and their part numbers can be found in the table below. This crimp terminal & splice case from TE Connectivity contains some ...