NOA1213CUTAG ON Semiconductor, Photoelectric Sensor Surface Mount 6-Pin

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The NOA1213 is a very low power ambient light sensor (ALS) with an analog current output and a power down mode to conserve power. Designed primarily for handheld device applications, the active power dissipation of this chip is less than 8 A at dark and its quiescent current consumption is less than 200 pA in power down mode. The device can operate over a very wide range of voltages from 2 V to 5.5 V.

Photopic Spectral Response
Senses Ambient Light and Provides an Output Current Proportional to the Ambient Light Intensity
Dynamic Dark Current Compensation
Three Selectable Output Current Gain Modes in Approximately 10x Steps
Power Down Mode
Less than 18 A at 100 lux Active Power Consumption in Medium Gain Mode (Less than 8 A at Dark)
Less than 200 pA Quiescent Power Dissipation in Power Down Mode at All Light Levels
Linear Response Over the Full Operating Range
Senses Intensity of Ambient Light from ∼0 lux to Over 100,000 lux

Specifications
Attribute Value
Typical Rise Time 1.5 (Minimum)ms
Typical Fall Time 300 (Maximum)µs
Number of Pins 6
Mounting Type Surface Mount
Application Automobile Dashboard, Cameras, Cell Phones, Digital Picture Frames, Digital Signage, Displays & Infotainment, GPS, Laptops, LCD TVs & Monitors, LED Indoor/Outdoor Residential & Street Lights, Mobile Devices with Displays or Backlit Keypads, MP3 Players, Notebooks, PDAs, Video Recorders
Dimensions 1.6 x 1.6 x 0.6mm
Height 0.6mm
Length 1.6mm
Maximum Wavelength Detected 590nm
Width 1.6mm
Output Signal Type Analogue
Series NOA1213
52300 In stock for delivery within 3 working days
Price Each (In a Pack of 50)
HK$ 3.867
(exc. GST)
units
Per unit
Per Pack*
50 - 50
HK$3.867
HK$193.35
100 - 450
HK$3.095
HK$154.75
500 - 950
HK$2.812
HK$140.60
1000 - 1950
HK$2.496
HK$124.80
2000 +
HK$2.344
HK$117.20
*price indicative
Packaging Options:
Related Products
0.35mm pitch, 0.8mm height, Board to Board or ...
Description:
0.35mm pitch, 0.8mm height, Board to Board or Board to FPC Connectors with Rated Current Up to 5A. Rated current 5AHighly reliable contact designGood mating operationSupports USB3.1 Gen.2 (10Gbps) transmission.
.050" SEARAY™ High-Speed High-Density Open-Pin-Field Array Terminal. Up ...
Description:
.050" SEARAY™ High-Speed High-Density Open-Pin-Field Array Terminal. Up to 500 I/Os.050" (1.27 mm) pitchRugged Edge Rate® contactLower insertion/withdrawal forcesSolder charge termination7 mm - 17.5 mm stack heightsDual sourced by Molex®Samtec 28+ Gbps Solution.
0.80 mm Razor Beam™ High-Speed Hermaphroditic Terminal/Socket Strip. ...
Description:
0.80 mm Razor Beam™ High-Speed Hermaphroditic Terminal/Socket Strip. Six stack height options from 6.00 mm to 12.00 mmAudible click when matedMating and unmating forces approximately 4-6x greater than typical micro pitch connectorsSelf-mating system reduces inventory costUp to 100 I/OsVertical and ...
0.80 mm Edge Rate® Rugged High-Speed Terminal Strip. ...
Description:
0.80 mm Edge Rate® Rugged High-Speed Terminal Strip. Rugged Edge Rate® contactSmooth broad milled contact surface for increased wear lifePositions: Up to 200Stack Height: 7.00 mm - 16.00 mmFinal Inch® break out region data availableDual sourced By Hirose®Samtec 28+ Gbps ...