Texas Instruments SCANSTA111MT/NOPB, 7-Bit Addressable Scan Port, 3 → 3.6 V, 48-Pin TSSOP

Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Addressable JTAG Port, Texas Instruments

The Texas Instruments SCANSTA111 extends the IEEE Std. 1149.1 test bus into a multi-drop test bus environment with the advantages of improved test throughput, and the ability to remove a board from the system whilst retaining test access to the remaining system modules. Each device supports up to three local IEEE 1149.1 scan rings which can be serially combined or accessed individually. A 32-bit TCK counter enables built-in self-test operations to be performed on one port while other scan chains are simultaneously tested.

The IEEE 1149.1 standard test access port and boundary-scan architecture uses devices known by the JTAG acronym, from Joint Test Action Group, and is used for testing and debugging system ports and PCB assemblies. Most embedded systems employ JTAG ports to enable in-circuit debugging and firmware programming, in addition to boundary scan testing.

Specifications
Attribute Value
Number of Element Inputs 7
Number of Elements per Chip 1
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 48
Dimensions 12.6 x 6.2 x 1.05mm
Length 12.6mm
Width 6.2mm
Height 1.05mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
Operating Supply Voltage Range 3 → 3.6 V
Operating Temperature Range -40 → +85 °C
Price Each (In a Tube of 38)
HK$ 83.002
(exc. GST)
units
Per unit
Per Tube*
38 +
HK$83.002
HK$3,154.076
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
Hi-FLEX®-CY cables are screened test and control cables ...
Description:
Hi-FLEX®-CY cables are screened test and control cables adapted for data transmission within electronics and automated or measurement systems. A tinned copper braid protects against electromagnetic interferenceAssembly: spiral with concentric layers, and PES tapeGeneral screening via tinned copper braid, cover ...
A CY multi-conductor cable with tinned copper braid ...
Description:
A CY multi-conductor cable with tinned copper braid shielding. Features and Benefits· Core insulation with PVC base· Cores stranded in layers· DIN colour code· Shield braid made from tinned wires· Transparent outer sheath made from special PVC-based mixture· Flame-retardant in ...
Ölflex® EB is a PVC control cable with ...
Description:
Ölflex® EB is a PVC control cable with a blue outer sheath for use in explosive atmospheres with hazard type "i" (intrinsically safe). Complies with DIN EN 60079-14 section 12.2.2 (VDE 0165 Part 1). Designed in accordance with HD 21.13 ...
Chainflex® PVC control cable is designed for medium ...
Description:
Chainflex® PVC control cable is designed for medium load requirements. • Silicon-free• Without influence of oil• Not shielded• Torsion resistant• Preferably indoor applications• Flame-retardant in accordance to IEC 60332-1-2, CEI 20-35, FT1, VW1• Freely suspended travel distances ...