Corded Power Tools

Corded power tools have power cables which run from electrical outlets. They’re used in a variety of industries including construction, carpentry and manufacturing, as well as for household and DIY tasks.

Popular power tools include drills, screwdrivers, sanders, saws and heatguns, which are all used for a number of different applications such as drilling, cutting,shaping, sanding, grinding, routing, polishing, painting and heating.

Advantages of corded power tools

  • Size, weight and handling – corded tools don’t require heavy batteries, which means they’re often lighter and smaller than cordless ones. For this reason, most professionals take a corded counterpart with them to jobs, in case they need to get into a restricted spot where a bulkier cordless tool can’t fit.
  • Constant power – an advantage to corded tools is they’re linked to a continuous electricity supply, so they never run out of power.
  • Torque corded tools offer high levels of torque thanks to a constant flow ofelectricity, so there aren’t limitations in terms of voltage .

Guides & Articles

article1_image

In our comprehensive Heat Gun guide, we look at what a Heat Gun is and the different types available. We cover how to use them and share some safety tips.

article1_image

In our Cordless Screwdriver guide, we look at the different types available. We also cover the key features as well as sometips to help you choose the right one.

Related Products
The EPDM, Ethylene Propylene sponge is sulphur cured. ...
Description:
The EPDM, Ethylene Propylene sponge is sulphur cured. TECHNICAL PROPERTIES:Hardness (solid) ASTM D2240 60 Shore ASpecific Gravity (Solid) BS ISO 2781:2008 1.18 g/cm3Specific Gravity (Sponge) BS ISO 2781:2008 0.61 g/cm3Mooney Viscosity (ML 1+4 @ 1000C BS ISO 289-1:2005 58 MooneyMooney ...
Water Byelaws Listed Grade EPDM rubber may be ...
Description:
Water Byelaws Listed Grade EPDM rubber may be used in all applications involving cold potable water useExcellent resistance to weatheringTemperature Range -40 → +100 °C.
Chemical gradeGood resistance to mineral oils, fuels, non-polar ...
Description:
Chemical gradeGood resistance to mineral oils, fuels, non-polar solvents, including high aromatic and chlorinated typesTemp. Range -18°C - +204°CSheet size 600 x 600mm.
Full face gasket sheets manufactured from Aramid fibres ...
Description:
Full face gasket sheets manufactured from Aramid fibres with a nitrile rubber binding. Available to fit BS10 table A and ASME BS16.21 flanges and with BST ’E and ASA 150 pressure ratings. 3XA anti-stick coating on both faces aids installation. ...