Bearing Heaters

Bearing heaters are used to quickly and evenly increase the temperature of bearings via induction heating, which makes it easier to mount them onto a shaft. Most bearing heaters come in 230V and 110V versions.

 

What are bearing heaters used for?

Bearing heaters form part of the tools suite used when repairing or building power transmissions. They make it possible to install bearings without having to execute force using hand tools, which can cause damage.


You can also use bearing heaters to heat other components, like gears, pulleys, bushings and shrink rings, as long as the heated parts form a closed electrical circuit. 

 

Types of bearing heaters

Induction coil bearing heaters and portable bearing induction heaters are the main types available.

 

Coil bearing heaters distribute heat evenly onto bearings with an interference fit mounting. The attached coil is on the outside of the heater component, resulting in reduced heating periods and efficient energy consumption.

 

Portable induction heaters are lightweight, quiet and do not magnetise components. These heaters are suitable for bearings of up to 4.5kg.


...
Read more Read less

Filters

Viewing 1 - 12 of 12 products
Results per page
Description Price Supply Voltage Maximum Bore Size Minimum Bore Size
RS Stock No. 845-9564
Mfr. Part No.TIH100M 230V
BrandSKF
HK$34,748.20
Each
units
200 → 240V 400mm 20mm
RS Stock No. 497-9584
Mfr. Part No.TIH030M 230V
BrandSKF
HK$22,646.05
Each
units
230V ac 300mm 20mm
RS Stock No. 680-8018
Mfr. Part No.TIH030M/110V
BrandSKF
HK$24,036.19
Each
units
110V ac 300mm 20mm
RS Stock No. 732-4726
Mfr. Part No.729659 C
BrandSKF
HK$7,777.00
Each
units
230V ac 100mm -
RS Stock No. 183-2642
Mfr. Part No.BH-02B/UK
BrandConemount
HK$8,315.78
Each
units
- 145mm 10mm
RS Stock No. 183-2647
Mfr. Part No.BH-02S/EUROPE
BrandConemount
HK$12,878.79
Each
units
- 205mm 20mm
New
RS Stock No. 197-7646
Mfr. Part No.TWIM 15/230V
BrandSKF
HK$21,969.83
Each
units
230V ac 320mm 20mm
RS Stock No. 183-2646
Mfr. Part No.BH-02C/UK
BrandConemount
HK$9,145.21
Each
units
- 145mm 10mm
New
RS Stock No. 197-7645
Mfr. Part No.TWIM 15/110V
BrandSKF
HK$21,969.83
Each
units
110V ac 320mm 20mm
RS Stock No. 183-2643
Mfr. Part No.BH-02C/EUROPE
BrandConemount
HK$9,145.21
Each
units
- 145mm 10mm
RS Stock No. 183-2649
Mfr. Part No.BH-02S/UK
BrandConemount
HK$12,878.79
Each
units
- 205mm 20mm
RS Stock No. 183-2641
Mfr. Part No.BH-02B/EUROPE
BrandConemount
HK$8,315.78
Each
units
- 145mm 10mm
Related Products
Removable top cover6, 7, 9U cases have a ...
Description:
Removable top cover6, 7, 9U cases have a different side panel construction to accommodate heavier equipmentShell handles can be replaced by folding handles, 50kg capacity (6, 7, 9U only)Folding feet can be fitted instead of standard anti-skid feet anthracite grey ...
Available separately to complete the case are:. Ventilated ...
Description:
Available separately to complete the case are:. Ventilated racking cases 529mm(W) x 400mm(D), with carrying handlesStacking capabilityDesk top mountingHigh impact resistant top and bottom covers, four steel mounting profiles and mounting hardwareCase grey white (RAL9002), mounting profiles grey (RAL7030)Conforms ...
A 19in. wall mountable enclosure made from high ...
Description:
A 19in. wall mountable enclosure made from high grade materials and designed to accommodate any standard 19in. equipment. The cabinet has two cable entry points on the top and bottom of the enclosure, plastic snap in panels cover these slots ...
Fixed shelf Linkeo - 2 U - depth ...
Description:
Fixed shelf Linkeo - 2 U - depth 360 mm - screw fixing on 2 x 19" uprights. Linkeo 19'' freestanding cabinets - cabinets and equipmentBlack RAL 9005Screw fixing on 2 x 19'' uprights:Height 2 UMax. load: 15 kgShelf depth ...