Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 1 - 20 of 44 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 876-2383
Mfr. Part No.525441-5
HK$3,866.67
Each
units
Plug Gauge - - -
RS Stock No. 876-2030
Mfr. Part No.169406
HK$88.97
Each
units
Stabilizer CERTI-LOK - -
RS Stock No. 174-3167
Mfr. Part No.908916-1
HK$8,668.55
Each
units
Anvil - - -
RS Stock No. 864-3434
Mfr. Part No.354005-1
HK$905.99
Each
units
Shear Blade - - -
RS Stock No. 864-3428
Mfr. Part No.354001-1
HK$3,788.70
Each
units
Wire Crimper AMPLIVAR - -
RS Stock No. 864-3406
Mfr. Part No.308031-3
HK$5,667.13
Each
units
Anvil - - -
RS Stock No. 864-3431
Mfr. Part No.354003-8
HK$1,859.29
Each
units
Wire Crimper - - -
RS Stock No. 174-3151
Mfr. Part No.5-22280-0
HK$17.11
Each
units
Spring - - -
RS Stock No. 876-2056
Mfr. Part No.169403
HK$328.90
Each
units
Locator AMP - -
RS Stock No. 174-3169
Mfr. Part No.908917-1
HK$7,133.97
Each
units
Anvil - - -
RS Stock No. 174-3163
Mfr. Part No.690716-3
HK$1,578.25
Each
units
Wire Crimper - - -
RS Stock No. 864-3380
Mfr. Part No.2031884-1
HK$1,715.26
Each
units
Anvil OCEAN - -
RS Stock No. 864-3614
Mfr. Part No.7-690512-4
HK$1,338.08
Each
units
Anvil - - -
RS Stock No. 174-3158
Mfr. Part No.690459-1
HK$2,449.06
Each
units
Shear Holder - - -
RS Stock No. 864-3416
Mfr. Part No.3-456406-3
HK$1,374.83
Each
units
Wire Crimper - - -
RS Stock No. 876-2321
Mfr. Part No.58516-1
HK$560.07
Each
units
Locator PRO-CRIMPER III - -
RS Stock No. 864-3557
Mfr. Part No.58422-1
HK$152,743.22
Each
units
Crimping Head DYNA-CRIMP - 58422
RS Stock No. 876-2065
Mfr. Part No.300389
HK$84.73
Each
units
Pin CERTI-CRIMP - -
RS Stock No. 174-3166
Mfr. Part No.722979-6
HK$7,807.84
Each
units
Wire Crimper - - -
RS Stock No. 876-2210
Mfr. Part No.525442-9
HK$1,875.68
Each
units
Plug Gauge - - -