Flap Discs

Flap discs are made from layers of abrasive cloth consisting of abrasive material such as:● Ceramic● Nylon● Zirconia Aluminium● Zirconium DioxideThe abrasive cloth is angled on a supporting plate and last up to 10 times longer than conventional fibre discs. How do they work?After selecting the right disc for application, the disc is attached to a corded or cordless angle grinder. Grinding with a consistent push pull technique will produce the best results. For use on wood, metal, painted surfaces and masonry.As the material wears away it exposes a new, fresh face of abrasive therefore achieving much higher material removal. Flap discs are particularly effective for rust removal and general finishing.Flap Disc Grades● Coarse - have a grit size of P40● Medium - have a grit size of P60 and P80● Fine - have a grit size of P120Uses ● Construction● Metal Work● Car Body repair

...
Read more Read less

Filters

Viewing 1 - 2 of 2 products
Results per page
Description Price Disc Diameter Grade Grit Size Abrasive Material Disc Type
RS Stock No. 851-7666
BrandRS PRO
HK$139.57
1 Box of 5
Box(es)
115mm Coarse P40 Zirconia Aluminium Flap Disc
RS Stock No. 851-7685
BrandRS PRO
HK$147.58
1 Box of 5
Box(es)
125mm Medium P80 Zirconia Aluminium Flap Disc
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...