Crimp Terminal Kits

Crimping is a way of terminating strands of wire in order to connect them to external circuits, using a crimping tool to squeeze a wire hard enough to cold weld it to a given terminal. Crimp terminal kits consist of a crimping tool and various types of terminal.


The advantage of crimping is that it forms gas-tight connections, so there is less corrosion of the wire, and the joints are mechanically strong as there is no additional material used, as opposed to soldering.


How do crimp terminal kits work?


There are broadly three steps to using crimp terminal kits:

  1. Insert the desired terminal into the crimping tool
  2. Insert the wire into the terminal
  3. Squeeze together the handles of the crimping tool to cold weld the terminal onto the wire

Types of crimp terminal


Crimp terminals can have different connectors, such as rings, spades, and butt splice terminals, depending on how you want to connect to the external circuit. There are also insulated and non-insulated terminals, depending on your price point and the needs of the circuit. Non-insulated terminals are cheaper but may short in certain environments, whereas insulated terminals protect against this.


...
Read more Read less

Filters

Viewing 1 - 20 of 48 products
Results per page
Description Price Type Connector Type Kit Contents Contact Plating Contact Material
RS Stock No. 441-5535
Mfr. Part No.A801632T
HK$867.11
Each
units
- Insulated Terminal Cable Tie Tool, Cable Ties, Crimp Tool, Insulated Terminals - -
RS Stock No. 109-797
BrandRS PRO
HK$616.06
Each
units
500 Piece Insulated Terminal Butt Splice, Crimp Tool, Pin, Ring, Shrouded Receptacle, Spade - -
RS Stock No. 266-0288
BrandRS PRO
HK$411.17
Each
units
French Colour Coded Bootlace Ferrule 0.5mm² → 10mm² Wire End Ferrules and crimp tool - -
RS Stock No. 534-828
BrandRS PRO
HK$309.82
1 Kit
Kit(s)
230 Piece Insulated Terminal Blade, Butt Splice, Crimp Tool, Female Receptacle, Ring, Spade - -
RS Stock No. 425-8770
Mfr. Part No.CRIMP-SET PZ 6/5 -9028740000
BrandWeidmuller
HK$3,241.45
Each
units
- Bootlace Ferrule 0.5mm² → 6mm² Wire End Ferrules - -
RS Stock No. 613-9952
BrandRS PRO
HK$1,433.70
1 Kit
Kit(s)
800 Piece Insulated Terminal Butt Splice, Compact Ratchet Tool, Crimp Tool, Female Receptacle, Pin, Ring, Spade - -
RS Stock No. 613-9974
BrandRS PRO
HK$870.36
1 Kit
Kit(s)
750 Piece Insulated Terminal Butt Splice, Ring, Spade - -
RS Stock No. 243-1052
Mfr. Part No.165346
HK$2,470.25
Each
units
PIDG Introduction Service PIDG Splices/Terminals, Plasti-Grip Terminals Case, Flanged Spade, Partition, PG Butt Splice, PIDG Ring Tongue, PIDG Spade, SRS Line Splice Connector, SRS PIDG Faton Receptacle, SRS PIDG Piggyback Faston - -
RS Stock No. 513-2540
BrandRS PRO
HK$149.99
Each
units
400 Piece Bootlace Ferrule 400 Ferules for 0.5 → 2.5mm Cable Diameter - -
RS Stock No. 228-0321
BrandRS PRO
HK$258.79
Each
units
French Colour Coded Bootlace Ferrule 0.5mm² → 10mm² Wire End Ferrules - -
RS Stock No. 408-9697
Mfr. Part No.DS-MIXT-05-RSU
HK$604.54
Each
units
DuraSeal Service and Repair Heat Shrink Terminals and Splices 0 x Duraseal Splice, 10 x Durseal Spade, 25 x Durseal Receptacle, 100 x Durseal Ring Terminal - Copper
RS Stock No. 847-8868
Mfr. Part No.KP-1075Y
BrandPanduit
HK$620.39
Each
units
- Insulated Terminal (10) BSV10X, (10) BSV14X, (10) BSV18X, (10) DNF14-250, (10) DNF18-250, (10) JN418-212 Nylon Wire Joint, (10) PV10-8R, (20) PV18-6F, (20) PV18-8R Vinyl Ring Terminal, PV10-10R Vinyl Ring Terminal, PV14-10R, PV14-8F Vinyl Fork Terminal - -
RS Stock No. 398-2264
Mfr. Part No.SK65B
BrandKlauke
HK$4,901.18
Each
units
- Tubular Ring Terminal Ring Tongue 6 → 50 mm² Tin Plated Copper
RS Stock No. 414-6611
Mfr. Part No.165154
HK$2,595.31
Each
units
Repair PIDG Splices/Terminals Faston Receptacle, Partition, PG Butt Splice, Ring Tongue, Spade, Wire Pin - -
RS Stock No. 513-2562
BrandRS PRO
HK$146.50
Each
units
German Colour Coded Bootlace Ferrule 0.5mm² → 1.5mm² Wire End Ferrules - -
RS Stock No. 413-2684
Mfr. Part No.ST11B
BrandKlauke
HK$315.41
Each
units
- Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 837-7418
Mfr. Part No.STK-1
Brand3M
HK$2,118.97
Each
units
- Insulated Terminal Scotchlok Crimping Tool TH-440 (1), 3M Cable Ties 06225 (100), 3M Cable Ties 06226 (100), 3M Highland Block Fork Terminals BFV14-10 (50), 3M Highland Block Fork Terminals BFV14-8 (50), 3M Highland Block Fork Terminals BFV18-6 (50), 3M Highland Block Fork Terminals BFV18-8 (50), 3M Highland Butt Connectors BSV10 (25), 3M Highland Butt Connectors BSV14 (50), 3M Highland Butt Connectors BSV18 (50), 3M Highland Female Disconnects FDV14-250 (50), 3M Highland Ring Tongue Terminal RV10-10 (25), 3M Highland Ring Tongue Terminal RV14-10 (50), 3M Highland Ring Tongue Terminal RV14-6 (50), 3M Highland Ring Tongue Terminal RV14-8 (50), 3M Highland Ring Tongue Terminal RV18-6 (50), 3M Highland Ring Tongue Terminal RV18-8 (50), 3M ScotchCode Tape Dispenser STD-0-9 (1) - -
RS Stock No. 425-8786
Mfr. Part No.CRIMP-SET PZ 16 -9025850000
BrandWeidmuller
HK$3,465.30
Each
units
- Bootlace Ferrule 6mm² → 16mm² Wire End Ferrules - -
RS Stock No. 374-4292
Mfr. Part No.H-BOX 0,5-2,5QMM DIN -9025430000
BrandWeidmuller
HK$394.44
Each
units
German Colour Coded Bootlace Ferrule 0.5mm² → 2.5mm² Wire End Ferrules - -
RS Stock No. 278-9395
Mfr. Part No.142945-1
HK$2,877.16
Each
units
- Plasti-Grip Terminals and Splices Clip, Connection, Fork, Round Terminal - -
Related Products
PushPull bulkhead mounted housing with HARTING PushPull technologyCompact, ...
Description:
PushPull bulkhead mounted housing with HARTING PushPull technologyCompact, space-saving design for device integration of RJ45-, USB-, Signal- or Power-pcb femaleHigh packing density (spacing 27 x 21 mm).
IP67 Common Core field installable IEC 61076-3-106 Variant ...
Description:
IP67 Common Core field installable IEC 61076-3-106 Variant 1 compliant RJ45 industrial circular plug and receptacle kits for use with Cat 5e cable in harsh environments. These industrial circular Ethernet IP67 RJ45 plug and receptacle kits have a pass-through modular ...
19" rack mount unit 1 HU with 24 ...
Description:
19" rack mount unit 1 HU with 24 RJ45 jacks assembled on one common PCBNo special tooling required for mounting of cover (shielded type)Printed circuit board is mounted horizontallyGrounding using the enclosed earth connection cable (shielded types)360° shielding can be ...
Category 3 right angle SMT RJ11, RJ12 and ...
Description:
Category 3 right angle SMT RJ11, RJ12 and RJ45 modular jacks with an industry standard footprint and a low 11.5 mm profile. These cat 3 low profile modular RJ jacks have black UL 94V-0 thermoplastic housings, highly reliable gold plated ...