PS/2 Cable Assemblies

PS 2 cable assemblies enable mice and keyboard connections to compatible computer systems. The cable assembly fits into the PS 2 port, which is a six pin mini-DIN connector.

PS 2 cable assemblies are made from PVC materials with aluminium foil screenings on the inside. PS 2 cable assemblies can be either shielded (single insulation) or double shielded (two insulation layers), to increase strain relief and cable protection.

The PS 2 interface designs are electrically similar, and the cable assemblies are distinguished by green colouring for mice and purple for keyboard connection ports.

What are PS 2 cable assemblies used for?

PS 2 cable assemblies were previously used to connect mice and keyboards to computers from the IBM Personal System/2 series. They have since been replaced with USB

In the manufacturing and production industries, PS 2 cable assemblies are still used to connect mice or keyboards to switch boxes and multiplexors. They are also used in data centres with switching applications where one keyboard, mouse and monitor combination controls multiple computers simultaneously.


Types of PS 2 cable assemblies

Types of PS 2 cable assemblies include mice cables, keyboard cables and extension cables.


...
Read more Read less

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Length Connector A Connector B Sheath Colour
RS Stock No. 394-3433
Mfr. Part No.11.01.5630-50
BrandRoline
HK$94.87
Each
units
3m PS/2 PS/2 Grey
RS Stock No. 327-6496
Mfr. Part No.11.01.5660-25
BrandRoline
HK$109.60
Each
units
6m PS/2 PS/2 Grey
RS Stock No. 199-497
Mfr. Part No.11.01.5618-50
BrandRoline
HK$46.06
Each
units
1.8m PS/2 PS/2 Grey
RS Stock No. 394-3427
Mfr. Part No.11.01.5690-25
BrandRoline
HK$141.34
Each
units
10m PS/2 PS/2 Grey
RS Stock No. 394-3477
Mfr. Part No.11.01.5830-50
BrandRoline
HK$94.87
Each
units
3m PS/2 PS/2 Grey
RS Stock No. 199-504
Mfr. Part No.11.01.5818-50
BrandRoline
HK$57.57
Each
units
1.8m PS/2 PS/2 Grey
Related Products
The EPDM, Ethylene Propylene sponge is sulphur cured. ...
Description:
The EPDM, Ethylene Propylene sponge is sulphur cured. TECHNICAL PROPERTIES:Hardness (solid) ASTM D2240 60 Shore ASpecific Gravity (Solid) BS ISO 2781:2008 1.18 g/cm3Specific Gravity (Sponge) BS ISO 2781:2008 0.61 g/cm3Mooney Viscosity (ML 1+4 @ 1000C BS ISO 289-1:2005 58 MooneyMooney ...
Water Byelaws Listed Grade EPDM rubber may be ...
Description:
Water Byelaws Listed Grade EPDM rubber may be used in all applications involving cold potable water useExcellent resistance to weatheringTemperature Range -40 → +100 °C.
Chemical gradeGood resistance to mineral oils, fuels, non-polar ...
Description:
Chemical gradeGood resistance to mineral oils, fuels, non-polar solvents, including high aromatic and chlorinated typesTemp. Range -18°C - +204°CSheet size 600 x 600mm.
Full face gasket sheets manufactured from Aramid fibres ...
Description:
Full face gasket sheets manufactured from Aramid fibres with a nitrile rubber binding. Available to fit BS10 table A and ASME BS16.21 flanges and with BST ’E and ASA 150 pressure ratings. 3XA anti-stick coating on both faces aids installation. ...