TE Connectivity, PLASTI-GRIP Insulated, Tin Crimp Pin Connector, 3mm² to 6mm², 12AWG to 10AWG, 2.6mm Pin Diameter,

PLASTI-GRIP wire pin terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP wire pin terminals is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funnelled entry on the wire barrel enables the stripped wire to be inserted more easily.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Not for use with double wire

The TE Connectivity insulated yellow-coloured crimp pin connector belongs to the PLASTI-GRIP series. This crimp pin connector is solderless electrical connection used to terminate a stranded wire by inserting the stripped end of the wire into a part of the terminal. Inside the barrel are serrations which provide maximum contact and tensile strength after crimping.

• Available in different colour-coded covers for easy wire size and tooling identification
• Barrel type is a close barrel
• Design enables a reliable and uniform crimp
• Funnelled wire entry for easy wire insertion
• It is made from high conductivity tin-plated copper with high dielectric strength
• Operation temperature ranges between -25°C and 90°C
• Overall length is 29.41mm
• PVC is used as an insulating material
• Wire size is in between 10AWG and 12AWG

• Motors
• Lifting equipment
• Aerospace
• Transportation
• Lighting
• Panel boxes
• Power supply instruments

TE Connectivity Plasti-Grip Terminals